What the logo looks like on wood

OK, so now I have used the woodburning tool method to basically melt the toner from the paper to the wood. It is very much like an iron on transfer. The only thing you need to watch out for is the fact that the woodburning tool gets hot enough to burn wood so you need to make sure you drop the temperature of the iron on a scrap piece of wood before applying the iron to the paper. You do not want to burn the paper or the wood you just want to melt the toner and transfer it to the wood.

The first image is of the piece at a distance and the second is a more close up picture of the finished logo. It is a little light and I may bold up the font more to get more toner there to transfer.

A nice closer view of the transfer

Thanks for looking. If you are interested I can try to put a video together of this if there is interest in how to do this technique.

Jim

Logo Version 1.1

OK, I have changed my logo. The last one was actually the second version because I thought I needed something from woodworking. But my nephew thought it was too much. When I shrunk it down to the size that I would use to put on my projects it was obvious I had too much going on and it was hard to see everything. SO I pulled out the saw blade and here is version 1.1 with some minor changes to account for the much smaller size.

So what does everything of this one? Go ahead and give your opinions!

Logo!

I have been working on a logo/stamp for my woodworking. I have been told in the past that I need to sign my work. I have looked at branding irons but way too expensive and you are stuck with whatever you have it is static. While if I do one a laser toner printer and print it in reverse I can then use my woodburning tool to transfer the toner to the wood much like an iron on transfer.

Anyway what do people think of this? Comments are always welcome!

Jim

Started on the Bully

I have begun the Bully pattern for the NC State Fair. I really don't want to put a picture of the pattern glued to the wood since I understand some people will take and make their own pattern from the picture. Since it is a pattern that must be paid for  I don't want anyone taking this pattern. So I will show you a picture of the 1,000 holes or so that I drilled tonight in preparation to start cutting it.Each one of those small dark spots is a hole I drilled.

Think about this if there are over a 1,000 holes drilled I will have to insert the blade that many times before I complete it! I have not done a pattern as complex as this ever. So this should be fun. Plus this will be done with a spiral blade. I am not as comfortable using spiral blades but those are the only ones you can possibly use on a pattern such as this one.

Here is a top view of me when I was drilling the holes with my Dremel.

Well What To Do About The State Fair

Well I picked what I want to cut for the NC State Fair this year. It is called The Bully and it is designed by Mike Williams of Mike's Scroll Saw Patterns. One of his patterns was the first place winner last year so here is hoping I'll do a decent job on it. I need to decide what wood I'll be using whether it be ply or solid wood. It is 11x14 so I could get some thin wood to do this on.

Now it is an picture of an Elephant so what wood to choose. It is as important a decision as the pattern. Everything comes into play not just the color but the grain also.

The link to The Bully

Mike has many a good patterns there and some look amazing.

Maybe this is the one where I will finally do a video of a project.

Anyway it is WAY TOO COLD to even think about going to my shop which is just a large shed in my backyard. There is no heat so I'm not going there. I do have a small heater but it can't do much when it is in the low 50's so never mind when it is in the low 30's. Yes I live in the south and low 50's is cold. So imagine when it is in the high 20's to low 30's.  I like to the high 90's to Low 100's.

~Jim